process tank

On the Control Factors Influencing the Volume of Plug-Flow Aeration Tank in the Activated Sludge Process

活性污泥法推流式曝气池池容影响因素的探讨

The Whole Forming Process and Die Design of Motorcycle Tank Outer Shell

摩托车油箱外壳体整体成形工艺及模具设计

There are two side tanks for alternating outlet. Additional settling tank, sludge and mixed liquor recirculation equipment are omitted. This process runs at constant water level with small water head loss. Power consumption is greatly saved because of low power load.

其中有两个边池交替出水，不需要单独设置沉淀池，省却了污泥和混合液回流设备，恒水位运行，水头损失小，装机负荷低，可以大大节省动力消耗。

Surface area calculation of secondary settling tank of activated sludge process

活性污泥法沉淀池断面的计算

Using nonlinear, horizontal and two dimensional modified Lynett-Liu model for internal long waves, we simulate the propagation process of small amplitude solitary waves going into and out of the tank outlet, and the diffraction through the narrow tank.

利用修正的非线性水平二维Lynett&Liu内长波数值模式，模拟了小振幅孤立子内波进出水道口的传播过程，及其穿过狭窄水道的衍射过程。

In reversed A2/ O process an anaerobic tank is put before anoxic tank and design dividual point infall in aerobic tank after anoxic tank.

在充分分析传统A2/O工艺的基础上，提出了将缺氧池置于厌氧池前面，厌氧池后设置好氧池的分点进水倒置A2/O工艺。

The technological characteristics and process of the cold forming of spherical storage tank shell are described based on practical experiences.

阐述了球形储罐壳板冷压成型的工艺特点、方法以及多年压制球罐的实践经验。

Secondly, paper introduces the composition structure and the manufacture craft characteristic of airplanes, describes the structure and the main assembly process and the assembly characteristic of the n# fuel tank section, points out the assembly accuracy control of the n# fuel tank section.

第二，介绍了飞机的组成结构、飞机制造工艺的特点、n油箱段的主要结构、n油箱段的主要装配过程、n油箱段的装配作业特点和n油箱段的装配准确度的控制方法；

Aluminum tank is the main equipment of Aluminum-making, the process of Aluminum-making is completed mainly in the Aluminum tank. However, the anode is the heart of the Aluminum tank, and it directly impacts on the economic and technical indicators of the Aluminum-making.

铝电解槽是炼铝的主要设备，铝的生产过程中最主要的阶段是在电解槽中完成的，而阳极是电解槽的心脏，直接的影响铝电解槽生产和各项经济技术指标。

Automation and systematization in oil tank cleaning was an inevitable result, the technology of oil tank cleaning went by a developing process from manual cleaning, machine cleaning to auto cleaning.

油罐清洗自动化和系统化是石油储运行业发展的必然结果，油罐清洗技术经历了从人工清洗、机械清洗最后到自动清洗的渐进式的发展历程。